External Flow Drum Sieve
Evsel It is a physical treatment equipment that is used in domestic wastewater treatment plants and in the removal of wastes originating from the process waters of many industrial facilities such as food, paper, plastic, fish processing plants, etc., and provides a high rate of TSS (Total Suspended Solid) removal.
The wastewater taken into the drum sieve through the pipeline is passed through the drum by hitting the outer wall of the 360° rotating drum. The filtered water, which is cleared of suspended solids, is collected in the lower chamber and then leaves the system. Solids held on the outer wall of the drum are scraped by a scraper and transferred to the container.
In order for this process to continue continuously and uninterruptedly, there is a washing device in the External Flow Drum Screen. By means of spray nozzles, the washing process is carried out from the inner surface of the sieve to the outside and the oil and similar wastes adhering to the sieve are cleaned.
EXTERNAL FLOW DRUM SIEVE, which can be produced from AISI 304 and AISI 316 quality stainless steel, provides high filtration by minimizing the clogging problem with the drum surface made of V-shaped special profiles. It also facilitates the stripping and washing process.
Advantage of External Flow Drum Sieve
- Ease Of Installation
- Low operating Cost
- High Screening Performance up to 1mm
- Applicability in Different Processes
- Minimum Clogging with Special Brush and Washing System
- Uninterrupted System.
You Can Contact Us For Different Channel Sizes And Grid Spacing